- Indoor Solutions
- Outdoor Solutions
- Client Cards
and Adapters  |  | RoamAbout® Wireless Adapter 54 Mbps Ethernet Adapter Supports 802.11a/b/g Ideally suited to environments where wireless connectivity is needed for non-PC Card enabled devices, this high-speed RoamAbout Wireless Ethernet Adapter converts any Ethernet-equipped workstation or device?including printers, PCs, MACs, Point of Sales Terminals and X-terminals?into a wireless LAN station. Since it's transparent to workstation hardware and software and no software drivers need to be loaded, plug-and-play installation is assured. Connecting a hub to the RoamAbout Wireless Ethernet Adapter allows you to connect up to 16 Ethernet devices to it, allowing several PCs, printers etc. to connect to the wireless network via this single device. RoamAbout Ethernet Adapter communicates with any 802.11a, 802.11b or 802.11g Wi-Fi Access Point?including the RoamAbout AP3000?as well as with other enterprise network resources such as servers and printers. Also compatible with any other 802.11a/b/g wireless clients in a peer-to-peer configuration, this solution provides seamless mobility, giving users the freedom to roam inside the wireless LAN coverage area without losing network connectivity. | Features & Benefits Wireless Ethernet connectivity for any 10/100Base-T client - High-performance data rate of 54 Mbps for both 802.11a and 802.11g
Plug-and-play operability - Operation transparent to network protocol and applications
- Provides full support of any workstation with an Ethernet port
- Connect up to 16 Ethernet devices via an Ethernet hub
- Easy to manage with RoamAbout Ethernet Adapter Manager, Web interface and Serial Console port
- Easy upgrades via the HTTP, FTP and TFTP
Standards-based security - Supports 802.1X Authentication with EAP-PEAP and EAPTTLS, WEP as well as AES Encryption algorithms, WPA & WPA2
- Supports MAC ACL, HTTPS/SSL for secure management
Standards-based network management - Web browser and SNMP support for remote management
Standards-based functionality - Uses the 2.4 GHz and 5.15-5.82 5GHz ISM bands, which require no license
- Supports 802.11a/b/g wireless standards: interoperates with all Wi-Fi™ certified products
Technical Specifications | Physical Specifications | | Dimensions: | 2.54 cm (1") x 12 cm (4.75") x 7.32 cm (2.88") | | Radio Interface : | 802.11a, 802.11b and 802.11g (Embedded radio) | | Radio Data Rates: | 802.11b: 11, 5.5, 2 and 1 Mbps
802.11a/g: 54, 48, 36, 24, 18, 12, 9 and 6 Mbps | | Radio Power Levels: | 802.11b/g: 18 dBm @ 54 Mbps
802.11a: 16 dBm @ 54 Mbps
| | Ethernet Interface: | RJ45, 10/100Base-T | | External Antenna (not currently supported): | Reverse SMA Male Connector | | Serial Interface: | DB9 Serial Connector | | Serial Data Rates: | 112 to 115K Baud | | Data Format: | 7,8 Data: 1,2 Stop; ENO Parity | | Environmental Specifications | | Operating Temperature: | 0°C to +40°C (32°F to +104°F) | | Non-Operating Temperature: | 40°C to +70°C (-40°F to +158°F) | | Humidity: | Operating: 10% to 95%, non-condensing | | Input Voltage : | 5.2 VDC | | Power Supply : | 100-240VAC | | Agency and Standards Specifications | | Safety: | UL 60950, CSA 60950, EN 60950, EN 60825 and IEC 60950 | | Electromagnetic Compatibility (EMC): | 47 CFR Parts 2 and 15, CSA C108.8, EN 555022, EN 55024, EN 300 328, EN 300 893, EN 301 489-17, EN 301489-1, and VCCI V-3 | Ordering Information | RBTSA-AA | RoamAbout 802.11a/b/g Ethernet Adapter | | RBTSA-AB | RoamAbout 802.11a/b/g Ethernet Adapter (ETSI Variant) | | RBT-AG-IA | Indoor Antenna for the RBTSA-AA/AB with 8 foot cable and Reverse SMA connector (2dBi @ 2.4GHz and 4dBi @ 5GHz) |
|
