| Home > Products > Fine Cut Rotary Mowers > AR-5™ |
 Fine-cut rotary mower ideal for maintaining green and tee surrounds and intermediate roughs.  |  |  |  |  |  | AR-5™ - Traction Control, On Demand - Increase traction by engaging weight transfer of decks to drive tires.
- Convertible 22" Envirodecks - Excellent mulcher with ability to discharge when conditions require; Conversion requires less than 5 minutes per deck.
- 60-hp Kubota® Turbo - Reliable power with plenty of horsepower.
- Parallel Series Traction - Improved turning geometry and great hill-climbing ability.
- Improved Lift Arm Design and Caster Design - Provides excellent range of motion to follow undulating terrain; Five independent cutting decks with improved lift arm and caster design.
|  |  | | | |  | AR-5™ | | Engine | Kubota® V2003T, 4-cylinder, liquid-cooled turbo-charged diesel | | Horsepower | 60 hp (44.7 kW) | | Displacement | 112 cu. in. (1,835 cc) | | Oil Capacity | 10.0 qts (9.5 L) | | Air Cleaner | 2-stage, Donaldson dry cartridge type with evacuator valve and service indicator | | Cooling | Side-by-side radiator/Hydraulic oil cooler; pressurized; 8 qt. (7.6 L) capacity; 16 gpm | | Engine Fan | 16.14 in (41 cm) diameter; 8-blade | | Lubrication | Fully pressurized with remote engine oil cooler | | Oil Filter | Full flow, replaceable spin-on, remote type | | Electrical System | 12V (1.4 kW) input/output controller; 40-amp alternator; key start | | | |  | | |  | VEHICLE | | Traction Drive | Parallel Series full-time four-wheel drive; variable-displacement, servo-controlled drive; four high-torque wheel motors; on demand electrically controlled hydraulic 4 WD valve with constant down hill speed with downhill reverse auto shift to 2 WD | | Deck Drive | 2-section pump and direct cooled deck motors | | Hydraulic System | 14 gal. (53 L) capacity; hydraulic oil monitor and horn alarm; Greens Care biodegradable fluid; full flow, 22-micron filter | | Hydraulic Cooling | Side-by-side Radiator/Hydraulic Oil Cooler; Pressurized, 0.3 gal (1.1 L) capacity, 14 gpm | | Steering | Hydrostatic power steering with tilt wheel | | Fuel Tank | 17 gal. (65 L) | | | | | | TIRES | | Front | Two 26.5 x 14-12, 6-ply, turf tread | | Rear | Two 20 x 10-8, 6-ply, turf tread | | | | | | BRAKES | | Service | Dynamic braking through traction circuit | | Parking | 9.25 in. (23.5 cm) disc brakes on front wheels; foot-operated | | Frame | Heavy-duty, formed-steel chassis with box-section frame rails | | Instruments | Hour meter; coolant temperature gauge; engine oil light; battery light; high hydraulic temperature light; hot engine protection system; glow-plug indicator; fuel level gauge | | Controls | Key ignition switch; hand throttle; parking brake; forward/reverse foot treadle; infinitely variable speed control; joystick one touch deck lift/lower lever for all 5 decks | | Traction Controls (weight transfer) | One touch button from decks to header. | | Seat | Deluxe suspension seat; 5 in. (127 mm) forward/backward adjustment | | | | | | SPEED | | Transport | 0 - 10 mph (0 - 16 km/h) | | Mow | 0 - 7 mph (0 - 11 km/h) | | Reverse Speed | 0 - 3.5 mph (0 - 6 km/h) | | | | | | DIMENSIONS | | Overall Length | 130 in. (3.3 m) | | Wheelbase | 58 in. (1.5 m) | Overall Height
(without O.P.S.) | 58.75 in. (1.49 m) | | | | Overall Width | | Mow and Transport | 98 in. (2.4 m) | | Weight | 3,951 lbs. (1,792 kg) | NOTE: Specifications, while correct at time of printing, may change
without notice. This product has been tested and complies with B71.4
-2004 ANSI voluntary safety specifications for commercial turf
equipment and also complies with EU safety regulations. | | | | |  | |  | Deck Number and Size | Five 22 in. (55.88 cm) rotary cutting decks | | Envirodeck™ | Rotary mulching/rear discharge deck; 4x29 rear roller w/taper roller bearing | | Construction | 7-gauge Heavy-duty, welded, pressed steel with engineered strength design | | Caster Wheels | 6.25 x 3.25-4, taper roller bearing | | Cutting Unit Lift | Cross-Cut lift position | | Weight Transfer | Hydraulically; from decks to tractor | | Blades | Five 22.375 in. (56.8 cm) heat treated alloy blades | | Motor/Spindle | Fixed displacement, self-lubricating w/1.0 in. (2.54 cm) diameter shaft; double sealed bearings | | Height of Cut | 0.75 in. (19 mm) to 5.25 in. (133 mm) in 0.25 in. (6 mm) increments; minimal tools required for adjustment | | Cutting Capacity | 6.8 acres/hr. at 7.5 mph (2.8 ha/h at 12 km/h) | | Overall Cutting Width | 90 in. (2.3 m) | | |  | |
 |
